Ästhetisches Zirkon

Indications

Anterior crowns, bridges up to 3 units, veneers, inlays and onlays, screw-retained crowns and 3 units bridges.

Contraindications

Not suitable for long-span bridges (>4 units)
Avoid cases with subgingival margins or limited occlusal clearance (<1.0 mm) without protective measures

Limitations

Lower flexural strength than full monolithic zirconia (~900 MPa vs. >1,000 MPa)
Susceptible to chipping under heavy occlusal forces
Esthetic outcome relies heavily on shade selection and tooth substrate color

Durability

Zirconia Esthetic flexural strength > 900 MPa

Preparation

Chamfer or shoulder margin; 1.2–1.5 mm occlusal reduction; 1.0–1.2 mm axial reduction

Turnaround Time

5 Days

Verification Steps

Digital design review and approval via Godent Lab Portal before fabrication
Fit and occlusion analysis through virtual simulation tools
Optional physical try-in models or resin prints for clinical evaluation
Final quality control check including marginal fit, contacts, and surface finish
Communication of any adjustments or feedback between clinician and lab prior to final production

Material Options

Ytria Mol: 4.6–4.9%
Available Colors: BL1, BL2, BL3,  A1, A2, A3, A3.5, A4, B1, B2, B3, B4, C1, C2, C3, C4, D2, D3, D4

Design Options

Facial cutback or full-contour design, optimized for esthetic zones; screw- or cement-retained options; customizable occlusion

Additional Services

Custom characterization and layering
Digital wax-up and digital mock-up
Resin model upon request
Intraoral try-in option upon request

Policies & Warranty

All Zirconia Esthetic restorations are backed by a limited lifetime warranty against material defects and workmanship errors. Godent reserves the right to evaluate each case individually before issuing a replacement or credit. Warranty does not cover issues caused by improper preparation, cementation, or oral conditions beyond clinical control.